1.hopper:  10L*2

2.cylinder  : 2.3L*2

3.output:  55-60L/H (550~600 cup）

4.Power:  4200W

5.  Voltage:220/380V,50/60Hz

7.Weight：265KG

8.Size： 600*820*1500mm

8.Compressor:  American  Copeland 1.25HP*2

9. Expand valve:  danfoss

10.Two Lcd control  panels, more intelligent

11.Pre-cooling to  keep ingredient in hopper fresh

12.Mix low warning  protection to avoid over-freezing of cylinder

13.Overnight standby  function reducing cleaning times to 3 times a week

14.Mitsubish motor  less noise

15.Big capacity, Producing ice cream continuously without stopping

16.Double system machine

17.Agitator in hopper

Always follow the instruction given by the supplier.

• When using the ready-to-use ice cream mixes which goes with stipulated proportion mixing water, do not try to add more water or sugar, since this may lower the quality of the product or disturb the operating condition of the machine.

• Always remember to sanitize the machine after it has been used, and always keep a strict hygiene.

• For best customer satisfaction, always taste the product before serving so you are always sure that you will provide the customer with a first class product

Always follow the instruction given by the supplier.

• When using the ready-to-use ice cream mixes which goes with stipulated proportion mixing water, do not try to add more water or sugar, since this may lower the quality of the product or disturb the operating condition of the machine.

• Always remember to sanitize the machine after it has been used, and always keep a strict hygiene.

• For best customer satisfaction, always taste the product before serving so you are always sure that you will provide the customer with a first class product

Machine Assembly Identification

Caption A

A1. Strap WheelStrap WheelStrap Wheel Strap WheelStrap WheelStrap Wheel Strap Wheel A2.φ45X30X10 Seal

A3. Seal Cover A4 . #106 Bearing

A5. Gearbox Cover A6 . #105 Bearing

A7. Big Gear A8 . Square Shaft

A9. Main Shaft A10 . Small Gear

A11. #303 Bearing A12 . #205 Bearing

A13. φ35X20X10 Seal A14. Main Gearbox

A15. Y- Ring A16. Seal Nut

A17. O- Ring